Stair Rise and Run (2021 IRC)
A compact extract of the 2021 IRC residential tread and riser limits, with a live layout from total rise and tread depth. This is a dimensions and code-chart page, not a generic staircase-calculator landing page.
2021 IRC R311.7 stair dimensions
The table below is an extract of commonly checked residential limits in the 2021 International Residential Code. Measure risers vertically between the leading edges of adjacent treads, and measure tread depth horizontally between the vertical planes of the foremost projections of adjacent treads, at a right angle to the leading edge (R311.7.5.1 and R311.7.5.2). Dimensions are exclusive of carpets, rugs, or runners.
| Dimension | 2021 IRC limit | Section |
|---|---|---|
| Maximum riser height | 7¾ in (196 mm) | R311.7.5.1 |
| Minimum tread depth | 10 in (254 mm) | R311.7.5.2 |
| Greatest riser minus smallest, in one flight | ⅜ in (9.5 mm) | R311.7.5.1 |
| Greatest tread minus smallest, in one flight | ⅜ in (9.5 mm) | R311.7.5.2 |
| Nosing projection where tread is less than 11 in | ¾ in to 1¼ in; ⅜ in maximum variation | R311.7.5.3 |
| Nosing not required | Where tread depth is at least 11 in | R311.7.5.3 exception |
| Nosing curvature / bevel | Radius not more than 9/16 in, or bevel not more than ½ in | R311.7.5.3 |
| Minimum stairway width | 36 in (914 mm) | R311.7.1 |
| Minimum headroom | 6 ft 8 in (2032 mm) | R311.7.2 |
| Maximum vertical rise of one flight | 12 ft 7 in (151 in / 3835 mm) between floors or landings | R311.7.3 |
| Landing at top and bottom | Required; width not less than the stair; 36 in in the direction of travel on a straight run | R311.7.6 |
| Walking-surface slope | Not steeper than 1:48 (2 percent), with a drainage exception at 1:20 | R311.7.7 |
The default example on this page is a 108 in total rise (a common rough story height) with a 7.75 in cap and a 10 in tread: 14 risers at about 7.714 in, 13 treads, and a 130 in total run. That rise is under 7¾ in and under the 12 ft 7 in flight cap; a nosing is still required because the tread is under 11 in.
This page does not apply UK going, pitch, or Approved Document K figures. For English private-stair limits, use the UK stair regulations page. For stairs serving a deck, also read the deck stairs notes — the geometry still comes from R311.7, but guards, open risers, and grade landings often differ in practice.
Sources
- 2021 International Residential Code (IRC), Sections R311.7 (stairways), R312 (guards), and R507 (exterior decks), including Tables R507.5(1), R507.5(5), and R507.6. The IRC is published by the International Code Council; the figures on these pages are the model-code values as printed in that edition.
- Public municipal extracts of the same 2021 IRC text, used to confirm section numbers and table cells: Town of Easton, Maryland, Typical Deck Details Based on the 2021 International Residential Code, and City of Venus, Texas, 2021 deck-code excerpt (Table R507.6).
- American Wood Council, Prescriptive Residential Wood Deck Construction Guide (DCA 6), as complementary commentary on IRC deck provisions. Use the edition that matches the adopted IRC, and read the code table rather than a marketing summary.
Disclaimer: These pages are planning tools and code-chart extracts only. They are not a substitute for the adopted building code, a local amendment, a permit review, or a licensed designer or engineer. The International Residential Code is a model code: it has legal force only where a jurisdiction adopts it, and many places amend individual limits. Approved Document K is guidance for meeting the Building Regulations in England; other UK nations use different documents. Stair Deck Reference does not inspect sites, approve drawings, or sign off construction.